APS AEON Studio Monitors (pr)

(No reviews yet) Write a Review
30.00 LBS
Free Shipping
Klasik Studio Monitor (shown in White)    NOTE: Ships with Standard finish.  Black Lacquer Semi-Gloss

APS (Audio Pro Solutions) AEON is the first and most popular APS product to date. Designed for experienced users such as sound engineers, music producers and musicians it has proven to be a very valuable tool, thanks to its balanced, dynamic and detailed sound that cuts through your mix with razor accuracy.

AEON takes full advantage of our extended experience in speaker design as well high quality of workmanship. It has some interesting features such as the unique bass controller. In most speakers this electronic extension of the lower range is hard wired. Here the user has the option to bypass it in order to obtain a slightly faster bass response, ideal for use with a sub woofer such as the SUB15.

Add to that attractive custom finishes and you get a great performer with a hard to beat price/quality ratio.

AEON is the perfect sidekick for all near/mid-field monitoring work, be it a pro recording studio, radio station or a "home studio" - a concept that has since its appearance become the dominant trend.

AEON is designed for stereo or multi-channel systems (5 +1 or 7+1 and larger) such as DOLBY, DTS, THX, etc.

Technical specifications 

Near-medium field monitor

Type Active – two power amplifiers

Tweeter: monolithic integrated circuit TDA7294
Woofer: Woofer p.a.: operates on 2SA1943/2SC5200
System Two-way
Crossover Frequency 1.5 kHz (slope: 24 dB/octave)
Dimensions Height x Width x Depth
42 cm x 27 cm x 36 cm / 16.6" x 10.5" x 14"
Free Field Frequency Response ±2 dB: 30 Hz - 30 kHz
SPL in Free Field @ 1m RMS: 108 dB (single)
Peak: 116 dB (pair)
Weight 18 kg / 39.6 lbs


Bass/Mid-Range Loudspeaker Ø 22 cm / 8" 
Diaphragm: cellulose, surround: rubber 
Magnetically Shielded
Tweeter loudspeaker Ø 2.5 cm / 1" in two versions:
Titanium dome 
Fabric dome

Magnetically Shielded


Bass/Mid-Range Power Amplifier 150 W RMS @ 4Ω
Tweeter Power Amplifier 70 W RMS @ 6Ω
Total Harmonic Distortions 0.005 % – PO = 5 W, f = 1 kHz
0.1 % max – PO = 0.1 up to 50 W, f = 20 Hz up to 20 kHz
Signal to Noise Ratio 103.5 dB – weighted by A curve 
101 dB – in band of 20 Hz up to 20 kHz
Input Voltage Level for 100 dB SPL in Free Field @ 1m 0 dBu (i.e. 0.775 V) – calibrated regulators in 0 dBu, 0 dB positions

Calibrated Controls

Input Sensitivity Switch 30dBu, 22dBu, 15dBu, 9dBu, 4dBu, 0dBu, -3dBu, -10dBV
Bass Controller Level Switch -15dB, -12dB, -9dB, -6dB, -3dB, 0dB, 3dB, 6dB
Bass Controller Switch Position ON: bass-reflex with active filter
Position OFF: "clear" quick bass-reflex
Tweeter Loudspeaker Level Switch -5dB, -3dB, -1.5dB, -0.5dB, 0dB, 0.5dB, 1.5dB, 3dB

Inputs, Outputs

Input Two Types (common socket Combo):
XLR symmetrical (balanced)
TRS symmetrical (balanced) 6.3 mm

Input Impedance 10 kΩ
„Loop Through” Output XLR symmetrical 
Output Impedance 100Ω


Tweeter Loudspeaker Protection Limiter (optical)
Bass/Mid-Range Loudspeaker Protection Limiter (optical)
Power Amplifiers Protections Interference, thermal, short circuit and over-current limiters


* NOTE: 

Color:  standard finish-black lacquer

Optional -custom finishes available upon request at an additional cost