Description
APS (Audio Pro Solutions) SUB 10 is a professional active studio subwoofer, designed for accurate sound realization.
SUB 10 is a professional active studio subwoofer equipped with sub-bass loudspeaker driver of 29 cm in diameter, class D power amplifier 400W at 4Ohm mounted on the rear panel, there are also calibrated controls, protections, indicators, and the input/output terminals.
SUB 10 is designed for operation in stereophonic or multi-channel systems (5 1 or 7 1 and larger) such as DOLBY, DTS, THX, etc.
This subwoofer is suitable for small/mid-sized:
- recording studios,
- broadcasting studios,
- TV studios,
- multimedia studios,
- post production facilities,
- mastering,
- digital workstations,
- home recording studios,
- audio monitoring systems of the highest quality
Technical Specifications
- Subwoofer
-
Type Active – Class D power amplifier Hypex: 400 W @ 4Ω Dimensions Height x Width x Depth
39 cm x 39 cm x 40 cm / 15.35″ x 15.35″ x 15.75″Free Field Frequency Response ±2.5 dB: 19-90 Hz SPL in Free Field @ 1m RMS: 108 dB (single subwoofer)
Peak: 116 dB (pair of subwoofers)Weight 24 kg / 53 lbs Calibrated Controls
Input Sensitivity Switch / VOLUME (8 positions) -4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB Input Sensitivity Switch / VOLUME (3 positions) -20dB, -10dB, 0dB Low-pass filter Switch CUT OFF 40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz Filters By-Pass Switch UNFILTERED (LFE) Position down: filters ON
Position up: filters OFFPHASE Switch 0 degrees, 180 degrees STAND-BY Switch Position down: active STAND-BY
Position up: continuous mode (Stand-by OFF)Loudspeaker
Subbass Loudspeaker Ø 29 cm
Diaphragm: cellulose, surround: rubberAmplifiers
Subbass Loudspeaker Power Amplifier 400 W RMS @ 4 Ω (270 W RMS @ 6 Ω) THD distortions Typ 0.01%, Max 0.05% 20Hz<f<20kHz, Pout < PR/2
Max 0.04% 20Hz<f<20kHz, Pout = 1WInputs, Outputs
INPUT right (R) and left (L) Two types (common socket Combo):
– XLR symmetrical (balanced)
– TRS symmetrical (balanced) “6.3 mm”
and RCA nonsymmetrical
Input impedance 10 kΩ„Loop Through” Output XLR symmetrical, Output impedance 100 Ω Protections
Subbass Loudspeaker Protection Pop-free start and stop control Power Amplifiers Protections Overcurrent protection Power Amplifiers Protections Overvoltage protection Signaling Devices
STAND-BY ON Orange LED CLIPPING detected Red LED POWER ON / DC-error detected Green LED / Red LED