Description
24×2 Desktop Mixer
The 5060 delivers the tonality and center section features of Rupert’s flagship 5088 console at your fingertips. Custom transformers, flexible monitoring, DAW transport controls, and the raw power of a Rupert Neve-designed 24×2 mix-buss.
Utilizing modern DAW control technologies, the 5060 seamlessly integrates stem outputs from the DAW with the rest of your control room. It sums the final mix, and provides 2-track outputs, source selection, and speaker feed outputs from the monitor section.
The 5060 includes a class-A mix buss and variable Silk that provides a wide range of tonal flavors. Drive the mix buss hard and crank the Texture knob for a rich, saturated, vintage vibe. Or, disengage Silk entirely for clear, wide-open sonic beauty.
Silk reduces the negative feedback on the output transformer, adding harmonic content as the texture is increased. Silk red mode accentuates the saturation in the high-mids and highs, while silk blue mode features more saturation in the lows and low mids.
With Silk engaged, the distortion characteristic and harmonic content of the unit are very reminiscent of many of Rupert’s class-A vintage designs. These controls add an unparalleled range of tonal options to the 5060.
Connections
Mix Inputs 1-24: 2 x DB-25
Mix Channel Inserts Send/Return1-8: 1 x DB-25
Mix Send to External Monitor:
Monitor Outputs (Mon 3 latching): 6 x XLR
Talkback Output: 1 x TRS
Talkback Remote: 1 x TS
Stereo Mix Insert/Return L-R: 4 x TRS
Stereo Mix Output:2 x XLR
Midi In / Out: 2 x Midi
Computer Connection: USB
Power:3-Pin IEC
Dimensions
18.5” wide x 12.5” deep x 5.75” high in the back (3.5” in the front)
Stereo Outputs
(unless otherwise specified, frequency is 1 kHz)
Channels 1-8 Max input level
Fader at 0: 25.4 dBu
Fader at +10: 15.2 dBu
Channels 9-24 Max input level
trim at 0: 25.4 dBu
Max Output level
Any combination of inputs: 25.4 dBu
THD+N
Channels 1-8, fader at unity, THD+N BW <10 Hz – 80k Hz
+20 dBu, 20 Hz: 0.023%
+20 dBu, 2 kHz: 0.0022%
+20 dBu, 20 kHz: 0.016%
Channels 9-24, trim at unity, THD+N BW <10 Hz – 80k Hz>
+20 dBu, 20 Hz: 0.023%
+20 dBu, 2 kHz: 0.0032%
+20 dBu, 20 kHz: 0.017%
Noise
BW 22 Hz – 22 kHz
Channels 1-24: Better than -90 dBV
Channels 9-24: Better than -100 dBV
X-talk
+ 10 dbu, 10 kH, L/R: -49 dB
Channel to channel
CMRR at 1K input to channel 1, 0 dBu fader at unity: -70 dBu
Frequency Response
10 Hz to 120 kHz: +/- 0.25 dB
185 kHz: -3 dB
IMD
+4 dBu, CCIF/DFD: 0.0008%
Silk (Texture control at maximum)
Noise
+20 dBu in, 20 Hz: Better than 5%
+20 dBu in, 200 Hz: Better than 0.2%
Frequency Response
0 dBu in, 20 kHz – 2.3 dBu
Distortion
+20 dBu in, 20 Hz –Better than 5%
+20 dBu in, 200 Hz – Better than 0.15%
Frequency Response
0 dBu in, 30 Hz: -1 dBu
Peak LED’s:
Trigger Threshold: +22 dBu
Monitor Outputs
Max Output level 1 kHz: +25 dBu
THD+N
+20 dBu, 20 Hz: 0.023%
+20 dBu, 2 kHz: 0.0032%
+20 dBu, 20 kHz: 0.017%
Noise
1-24: Better than -90 dBV
9-24: Better than -100 dBV
Headphone Out
Max output level: Better than +20 dBu, unloaded
THD+N
2 kHz into 68 ohms, 16 dBu output: Better than 0.02%
Noise (22 Hz – 22 kHz): Better than -85 dBV
Minimum Load: 16 ohms recommended (8 absolute min)