Tascam ML-16D 16 channel Dante Audio Interface

$1,999.00

Call For Availability
Finance Now
SKU: ML-16D Categories: , Brand:

Description

Tascam ML-16D 16 channel Dante/Analog Converter

The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.

A poweful and flexible solution, the TASCAM ML-316D has 2 D-Sub intputs and 2 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into – or extracted from – the Dante audio stream.

 Features:

  • ?  Dante focused interface for connection of external audio into or out of a Dante audio network
  • ?  16 channel analog line input and 16 analog line outputs (48kHz/96kHz) using 4 D-Sub connectors
  • ?  Dual redundant Ethernet jacks which support both primary and secondary connections
  • ?  Up to 24 bit/96kHz quality
  • ?  LED display for signal level and overload per input/output channel
  • ?  Reference level dip switches for selectable DBu level metering
  • ?  Firmware updatable via Dante port
  • ?  AES67 and Revenna compatible

SPECS:

 

Formats 

44.1/48 kHz, 16/24 bit

88.2/96 kHz, 16/24 bit

Input/output ratings 

PRIMARY/SECONDARY connectors 

Connector: RJ-45

Transmission protocol: Dante

Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)

Cables: category 5e or faster STP cables

ANALOG OUTPUT connectors 

Connector: D-sub 25-pin

Locking screws: No. 4-40 UNC (inch type)

Nominal output levels: 4 dBu, 6 dBu (only when maximum output level is 15 dBu)

Maximum output levels: 24 dBu, 22 dBu, 20 dBu, 18 dBu, 15 dBu (set by REF. LEVEL switches)

Output impedance: 200 Ω or lower

Applicable load impedance: 2 kΩ or higher

ANALOG INPUT connectors 

Connector: D-sub 25-pin

Locking screws: No. 4-40 UNC (inch type)

Nominal input levels: 4 dBu, 6 dBu (only when maximum input level is 15 dBu)

Maximum input levels: 24 dBu, 22 dBu, 20 dBu, 18 dBu, 15 dBu (set by REF. LEVEL switches)

Input impedance: 10 kΩ or higher

 * 0 dBu=0.775 Vrms   

Additional information

Weight 7.5 kg