Yamaha DXR8

$749.99

Out of stock

SKU: DXR8 Categories: , Brand:

Description

To place an order – Call Us!

The DXR8 is perfectly suited for front of house sound, monitors, simple amplification, rigged applications and more.

Ultra-Precise 48Bit DSP Processing for High-Definition Sound

All full range models feature Yamaha’s proprietary FIR-X tuning™ utilizing linear phase FIR* filters for the crossover network. FIR-X™ tuning simultaneously optimizes frequency and phase response while adjusting the time alignment between the HF and LF transducers. This creates a very smooth response around the crossover point, providing much better clarity and imaging than what is possible with typical crossovers. All signals are precisely processed by a 48bit (76bit accumulator) high-performance processor for high definition sound quality. All full-range models employ high-precision 24bit discrete A/D and D/A converters with superior S/N ratio and dynamic range.

Intelligent Dynamic Control for Consistent Clarity at Any Output Level

D-CONTOUR is an intelligent multi-band compressor that gives you powerful and consistent sound throughout all output levels. By constantly monitoring the output of multiple frequency bands and calculating the optimum EQ adjustments for each, even the maximum sound output maintains outstanding clarity and musicality.

Extensive DSP Protection Functions for Maximum Output

These speakers can perform to their full potential while ensuring reliable operation in even the most severe conditions. – Switchable White Front LED Each of the full-range models and DXS speakers has a white LED behind the front grille that illuminates when powered and varies in brightness depending on the amount of system limiting.

High-Efficiency 1100W Class-D Amplifiers

These high-performance amplifiers deliver the highest sound output in their class with 1100W of power, producing an impressive SPL up to 133dB.

Intelligent Onboard 3-Channel Mixer

he DXR Series features a flexible onboard mixer with a variety of input, making it ideal for simple vocal/ instrument amplification. With its flexible IN/OUT, the DXR Series can comprise a full sound reinforcement system, or seamlessly integrate into a setup utilizing DSR or DXS Series speakers. – Versatile Mic and Line Level Input Capability The DXR onboard mixer can handle up to three simultaneous inputs. It accepts both Mic and Line level input, giving you the flexibility to connect to a variety of sources from microphones to line level instruments and portable audio devices.

Superior Components. Unequaled Performance

Custom-Designed DXR Transducers All DXR Series transducers were meticulously selected and thoroughly customized to deliver ultimate performance.

Dual-Angle Pole Mount Socket

The DXR’s pole mount socket offers two positions—0° and 7°—to direct the acoustic energy away from reflective surfaces and on to your audience where it belongs.

Rigging Points for Standard Eye-Bolts and Optional U-Brackets

Speaker type 8″ 2-way, Bi-amp powered speaker, Bass-reflex type
Frequency Range (-10dB) 57Hz – 20kHz
Nominal coverage H 90°
V 60°
Components LF Diameter:8″ cone, Voice Coil:2″, Magnet:Ferrite
HF Diaphragm:1.4″, Type: 1″ throat compression driver, Magnet:Ferrite
Crossover FIR-X tuning™ (linear phase FIR filter)
Output power Dynamic:1100W (LF: 950W HF: 150W) / Continuous: 700W (LF: 600W HF: 100W)
Maximum output level (1m; on axis) 129dB SPL
I/O connectors INPUT: XLR-3-31 x1 , INPUT2: Phone x2, INPUT3: RCA PIN x 2, THRU: XLR3-32 x 1 (Parallel with INPUT 1), LINK OUT: XLR x 1
Processors D-CONTOUR :FOH / MAIN, MONITOR, OFF
Power requirements 100V – 240V, 50Hz/60Hz
Power consumption 90W
Flying and mounting hardware Top x2, Rear x1 (Fits for M8 x 15mm eyebolts)
Pole socket 35mm with 2-way features (0 or 7 degrees)
Dimensions W 280mm (11″)
H 458mm (18″)
D 280mm (11″)
Net weight 13.5kg (29.8lbs)

The high power output woofers deliver very low distortion and defined, deep bass, while the 1.4” precision compression drivers produce accurate midrange and high frequencies up to 20 kHz. – DXR Wide Dispersion Constant-Directivity Horn The HF transducer is mounted to an all-new 90°x 60°constant-directivity horn, designed with the goal of minimizing radiation pattern deterioration in oblique directions as more conventional horns are prone to doing. This can help to achieve a more ideal coverage area without irregularities. With the new wide dispersion constant-directivity horn, sound expands in a more rectangular pattern providing 90° horizontal x 60 °vertical coverage, with wide-frequency sound projected to the edges of the coverage area.

Durable, Compact ABS Enclosures

Full-range models are moulded in rugged, non-resonant ABS enclosures and are designed to dampen down vibrations caused by high output levels, producing less distortion and superior sonic quality. The road-tested enclosures are equipped with heavy-duty steel grilles and ergonomic, gripped aluminum handles that greatly improve durability and portability.

Additional information

Weight 29.8 kg